GJD’s Conduit Cable Adaptor is available for surface mount conduit/cable installations. The adaptor comes complete with an integral wall tamper system.Suitable for 20mm conduit protected surface run cablesIntegrated rear tamper mechanism designed to perfectly...
External PIR Detector is IP55 rated, 10 to 35 metre and 90 degree fully adjustable. It is an inconspicuous and proven 35-metre external passive infrared detector. 24 hour indication and movement activated lighting for a timed period is automatically provided....
The D-TECT 2 is a BS 8418 compliant, quad element PIR external movement detector which can be used to control cameras and also interfaces with GJD’s lighting control systems. The detector’s Quad PIR sensing module is equipped with two volt free and two...
A useful;installation tool to help set up D-TECT’s on site. The walk tester provides a loud audible detection confirmation, as well as a bright;white LED for long range setup.Requires a 9V PP3 battery, not provided.Power 9VDC (PP3 Cell)Current Standby:...
The D-TECT X4 provides an additional 4 channels for an existing D-TECT X Receiverinstallation.; The module can be combined with two additional 4 way expansion modules to provide a maximum of 16 channels per D-TECT X Receiver.
External PIR Detector is IP55 rated, 10 to 35 metre and 90 degree fully adjustable. It is an inconspicuous and proven 35-metre external passive infrared detector. 24 hour indication and movement activated lighting for a timed period is automatically provided....
The D-TECT 50, BS 8418 compliant movement detectors combine advanced signal processing and unique optical systems, which allow for the beam range to be programmed from 25 to 50 metres, avoiding boundary overspill, making it particularly effective for perimeter...
The D-TECT 3 is a BS8418 compliant, quad element PIR and microwave external movement detector, which can be used to control cameras, connect to alarm panels and communicate with GJD’s lighting control systems. The detector’s triple technology sensing...
The GJD230 is an internet protocol connected detector that combines advanced signal processing and unique optical systems. The detection beam range can be programmed up to 30 metres, avoiding boundary overspill and making it particularly effective for perimeter...
The GSM speech and text communicator provides a simple yet effective solution to all of your security equipment notification needs. Once triggered the GSM speech and text communicator automatically sends a voice or text message to one of nine designated,...
The BS8418 compliant D-TECT X detectors all feature quad PIR sensor modules, stylish IP65 fully tampered housings with a discreet internal antenna. Units accept 2 x 3 volt CR123 batteries, 500m RF transmission range on 868MHz and individual code for pairing to the...
The BS8418 compliant D-TECT X detectors all feature quad PIR sensor modules, stylish IP65 fully tampered housings with a discreet internal antenna. Units accept 2 x 3 volt CR123 batteries, 500m RF transmission range on 868MHz and individual code for pairing to the...
The D-TECT X Repeater can be used to extend the RF range of a D-TECT X detector, or to boost signal in a poor reception area. The D-TECT X Repeater must be placed within 500 metres line of sight between the D-TECT X detector(s) and D-TECT X Receiver(s). The unit will...
GJD394;signal strength tester is an installation tool to aid the set up of D-TECT X wireless detectors. The tester measures signal strength from the detector at the receiver location and indicates if the detector is active by a simple walk test.
The GJD392Receiver is an IP55 weatherproof, tamper protected, four channel unit equipped with two volt free & two negative switched outputs per channel. It can be expanded by the addition of up to 3 four channel expansion modules to allow the receiver unit to...
The D-TECT 3 IP is an internet protocol connected;dual tech detector that combines advanced signal;processing and unique optical systems. The detection;beam range can be programmed up to 30 metres,;avoiding boundary overspill and making it particularly;effective for...
The GJD250 IP is an internet protocol connected detector that combines advanced signal processing and unique optical systems. The detection beam range can be programmed up to 50 metres, avoiding boundary overspill and making it particularly effective for perimeter...
IP65 (Suitable for outdoor use)Low voltage 12V DC supply inputTemperature compensation for extreme environmentsAvailable in silverFour selectable detection rangesTriple technology, PIR, microwave and antimaskingNarrow PIR curtain lensUp to 12m selectable detection...
• Single Pole mounting bracket compatible with all D-TECT series & Clarius Infra-Red and;White-Light illuminators including SMB1, DMB1 and TMB1• Supplied with stainless steel straps to fit 7.5 to 20 cm diameter pole• Stainless steel...